;; Windows for Workgroups 3.11
;; SETUP.INF
;; Copyright (c) Microsoft Corporation, 1991-1993

[setup]
    help = setup.hlp

;   Place any programs here that should be run at the end of setup.
;   These apps will be run in order of their appearance here.
[run]

[dialog]
    caption   = "Program instalacyjny Windows"
    exit      = "Zakończ instalację Windows"
    title     = "Instaluje Windows for Workgroups 3.11"
    options   = "Po zainstalowaniu Windows możesz dodatkowo:"
    printwait = "Poczekaj aż program instalacyjny skonfiguruje drukarki..."
;copywait= "Witamy w Microsoft Windows for Workgroups 3.11!\n\nZajrzyj do dokumentacji Windows, aby zapoznać się\nz nowymi możliwościami tej wersji Microsoft Windows."
;copywait5="Nie zapomnij zarejestrować się jako legalny użytkownik\nMicrosoft Windows for Workgroups 3.11. Daje Ci to dostęp do\npomocy technicznej oraz do bieżących informacji\no nowych produktach i aktualizacjach.\n\n"

[data]
; Disk space required
; <type of setup>= <Full install space>, <Min install space>

    upd2x386full = 19000000,14000000 ; 19.0 Mb, 14.0 Mb     2.x -> WFW 3.11
    upd30386full = 14500000,10500000 ; 14.5 Mb, 10.5 Mb     3.0 -> WFW 3.11
    upd31386full = 10500000, 7500000 ; 10.5 Mb,  7.5 Mb     3.1 -> WFW 3.11
    updWW386full =  6000000, 3500000 ;  6.0 Mb,  3.5 Mb     WFW 3.1  -> WFW 3.11
    updW1386full =  3000000, 2000000 ;  3.0 Mb,  2.0 Mb     WFW 3.11 -> WFW 3.11
    new386full   = 19000000,14000000 ; 19.0 Mb, 14.0 Mb

    netadmin     = 29000000          ; 29.0 Mb
    netadminupd  = 29000000          ; 29.0 Mb
    upd2x386net  = 1300000           ;  1.3 Mb
    upd30386net  = 1300000           ;  1.3 Mb
    upd31386net  = 1300000           ;  1.3 Mb
    new386net    = 1300000,1300000   ;  1.3 Mb,  1.3 Mb

; Defaults used in setting up and names of a few files
    startup   = WIN.COM
    defdir    = C:\WINDOWS
    defdevdir = C:\NET
    shortname = Windows
    welcome   = "Microsoft Windows for Workgroups 3.11"
    deflang   = plk
    defxlat   = 852
    defkeydll = poldll
    register  = "regedit /s /u setup.reg"
    tutor     = "wintutor.exe "
    winsetup  = "winsetup.exe"
    NetSetup  = FALSE
    MouseDrv  = TRUE
    partial   = FALSE
    Version   = "3.11.050"
    dosmemK   = 410

    ; MS-DOS Driver Versions
    ; These are the version numbers of the drivers that we are shipping
    ; with Microsoft Windows.
    himem.sys.hi     = 0x0310
    himem.sys.lo     = 0x0300
    smartdrv.exe     = 0x0500
    ramdrive.sys     = 0x18F5
    emm386.exe       = 0x0430

; This is data needed by the MS-DOS half of setup so that it can copy the
; proper kernel and start Windows for the GUI portion of setup.
;
; ** MS-DOS documentation says that first byte of command line for 4a call
; ** should be space. ==> in execcmd RHS leave first space as it is now
[winexec]
    execstd   = "dosx.exe "
    execcmd   = " krnl386.exe /b /q:"
    exechimem = "xmsmmgr.exe"
    himemcmd  = ""
    Krnl386   = 1:krnl386.exe
    dosx      = 2:dosx.exe

; Names of the disks Setup can prompt for.
[disks]
    1 =. ,"Microsoft Windows for Workgroups 3.11 Dyskietka nr 1",disk1
    2 =. ,"Microsoft Windows for Workgroups 3.11 Dyskietka nr 2",disk2
    3 =. ,"Microsoft Windows for Workgroups 3.11 Dyskietka nr 3",disk3
    4 =. ,"Microsoft Windows for Workgroups 3.11 Dyskietka nr 4",disk4
    5 =. ,"Microsoft Windows for Workgroups 3.11 Dyskietka nr 5",disk5
    6 =. ,"Microsoft Windows for Workgroups 3.11 Dyskietka nr 6",disk6
    7 =. ,"Microsoft Windows for Workgroups 3.11 Dyskietka nr 7",disk7
    8 =. ,"Microsoft Windows for Workgroups 3.11 Dyskietka nr 8",disk8
    9 =. ,"Microsoft Windows for Workgroups 3.11 Dyskietka nr 9",disk9
    A =. ,"Microsoft Windows for Workgroups 3.11 Dyskietka nr 10",diska

[windows]
    1:setup.hlp
    1:setup.txt
    2:win.src,    Net
    2:system.src, Net
    1:instaluj.com
    1:winsetup.exe
    1:winhelp.exe
    1:control.hlp
    2:winhelp.hlp
    2:glossary.hlp

[windows.system]
    1:gdi.exe
    1:user.exe
    1:win.cnf
    2:lzexpand.dll
    2:ver.dll
    2:shell.dll
    1:wfwsetup.dll
    2:commdlg.dll
    2:commctrl.dll
    1:ncdw.dll
    2:sconfig.dll

[windows.system.386]
    1:cpwin386.cpl

[386max]
    2:386max.vxd
    2:windows.lod

[bluemax]
    2:bluemax.vxd
    2:windows.lod

[shell]
    progman.exe,  "Menedżer programów"

; !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
: !!! The description strings should not be changed.
; !!! Changing description strings can result in old drivers not being
; !!! upgraded since Setup uses the description string to determine what
; !!! driver is installed and whether a new, upgraded driver is provided
; !!! with this version of Windows.
; !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
;

[display]
;profile = driver,         Description of driver,                           resolution,286gr,logo code,       VDD,            386grabber,   ega.sys,   logo data,    optional work section
;
8514     = 2:8514.drv,     "8514/a",                                        "100,120,120", , 2:vgalogo.lgo,   2:vdd8514.386,  2:vgadib.3gr,,           2:vgalogo.rle, 8514
8514s    = 2:8514.drv,     "8514/a (Small fonts)",                          "100,96,96",   , 2:vgalogo.lgo,   2:vdd8514.386,  2:vgadib.3gr,,           2:vgalogo.rle, 8514s
vga      = 2:vga.drv,      "VGA",                                           "100,96,96",   , 2:vgalogo.lgo,   x:*vddvga,      2:vga.3gr,,              2:vgalogo.rle
vga30    = 2:vga.drv,      "VGA (Version 3.0)",                             "100,96,96",   , 2:vgalogo.lgo,   2:vddvga30.386, 2:vga30.3gr,,            2:vgalogo.rle
svga     = 2:supervga.drv, "Super VGA (800x600, 16 colors)",                "100,96,96",   , 2:vgalogo.lgo,   x:*vddvga,      2:vga.3gr,,              2:vgalogo.rle
8vga480  = 2:svga256.drv,  "Super VGA (640x480, 256 colors) ",              "100,96,96",   , 2:vgalogo.lgo,   2:vddsvga.386,  2:vgadib.3gr,,           2:vgalogo.rle, svga640
8vga600l = 2:svga256.drv,  "Super VGA (800x600, 256 colors, large fonts)",  "100,120,120", , 2:vgalogo.lgo,   2:vddsvga.386,  2:vgadib.3gr,,           2:vgalogo.rle, svga800l
8vga600s = 2:svga256.drv,  "Super VGA (800x600, 256 colors, small fonts)",  "100,96,96",   , 2:vgalogo.lgo,   2:vddsvga.386,  2:vgadib.3gr,,           2:vgalogo.rle, svga800s
8vga768l = 2:svga256.drv,  "Super VGA (1024x768, 256 colors, large fonts)", "100,120,120", , 2:vgalogo.lgo,   2:vddsvga.386,  2:vgadib.3gr,,           2:vgalogo.rle, svga768l
8vga768s = 2:svga256.drv,  "Super VGA (1024x768, 256 colors, small fonts)", "100,96,96",   , 2:vgalogo.lgo,   2:vddsvga.386,  2:vgadib.3gr,,           2:vgalogo.rle, svga768s
v7vga    = 2:v7vga.drv,    "Video 7 512K, 640x480 256 colors",              "100,96,96",   , 2:vgalogo.lgo,   2:v7vdd.386,    2:v7vga.3gr,,            2:vgalogo.rle, v7b
v7c      = 2:v7vga.drv,    "Video 7 512K, 720x512 256 colors",              "100,96,96",   , 2:vgalogo.lgo,   2:v7vdd.386,    2:v7vga.3gr,,            2:vgalogo.rle, v7c
v7d      = 2:v7vga.drv,    "Video 7 1Mb,  800x600 256 colors",              "100,96,96",   , 2:vgalogo.lgo,   2:v7vdd.386,    2:v7vga.3gr,,            2:vgalogo.rle, v7d
v7e      = 2:v7vga.drv,    "Video 7 1Mb, 1024x768 256 colors (Large fonts)","100,120,120",, 2:vgalogo.lgo,   2:v7vdd.386,    2:v7vga.3gr,,            2:vgalogo.rle, v7e
v7f      = 2:v7vga.drv,    "Video 7 1Mb, 1024x768 256 colors (Small fonts)","100,96,96",  , 2:vgalogo.lgo,   2:v7vdd.386,    2:v7vga.3gr,,            2:vgalogo.rle, v7f
xga16    = 2:vga.drv,      "XGA (640x480, 16 colors)",                      "100,96,96",   , 2:vgalogo.lgo,   2:vddvga30.386, 2:vga30.3gr,,            2:vgalogo.rle
xgasm    = 2:xga.drv,      "XGA (Small fonts)",                             "100,96,96",   , 2:vgalogo.lgo,   2:vddxga.386,   2:v7vga.3gr,,            2:vgalogo.rle, xgasm
xgalg    = 2:xga.drv,      "XGA (Large fonts)",                             "100,120,120", , 2:vgalogo.lgo,   2:vddxga.386,   2:v7vga.3gr,,            2:vgalogo.rle, xgalg
xgalo    = 2:xga.drv,      "XGA (640x480, 256 colors)",                     "100,96,96",   , 2:vgalogo.lgo,   2:vddxga.386,   2:v7vga.3gr,,            2:vgalogo.rle, xgalo

[display.old]
; This section contains the names of all the videos that
; setup can detect. If the entry is not in the [display]
; section above, setup presents a warning to the user.
8514     = "8514/a"
cga      = "CGA"
egahibw  = "EGA black and white (286 only)"
egahires = "EGA"
egamono  = "EGA Monochrome (286 only)"
hercules = "Hercules Monochrome"
hpmulti  = "HP CGA Display"
mcga     = "IBM MCGA (286 only)"
olibw    = "Olivetti/AT&T Monochrome or PVC Display"
plasma   = "Compaq Portable Plasma"
tiga1    = "TIGA"
v7vga    = "Video 7"
vga      = "VGA"
vgamono  = "VGA with Monochrome display"
xga16    = "XGA"


;
; Optional sections listed in field 9 of the display secton are intrpreted as follows:
;
; File, Destination, .ini file, Section, LHS, RHS
;
; Where:    x:File      = Optional; file to be copied, may be left null.
;           Destination = 0: for windows root or 0:system for system subdir
;                          where file is to be copied.
;           .ini file   = Optional; .ini file to be modified or created.
;                          Must be included if following parameters specified.
;           Section     = Section of .ini file to be modified.
;           OldLine     = Optional; old line to be removed from the .ini file.
;                          Only one occurence of the specified string is removed.
;           NewLine     = New text line to be written to the .ini file.
;
;[v7vga]
;x:v7vga.vxd, 0:system, system.ini, 386enh, "v7device=", "display=v7vdd.386"

[vgamono]
,,system.ini,386enh,"vgamono=","vgamono=TRUE"

[8514]
,,system.ini,8514.DRV,"dpi=","dpi=120"

[8514s]
,,system.ini,8514.DRV,"dpi=","dpi=96"

[v7b]
,,system.ini,v7vga.drv,"WidthXHeight=","WidthXHeight=640x480"
,,system.ini,v7vga.drv,"FontSize=","FontSize=small"

[v7c]
,,system.ini,v7vga.drv,"WidthXHeight=","WidthXHeight=720x512"
,,system.ini,v7vga.drv,"FontSize=","FontSize=small"

[v7d]
,,system.ini,v7vga.drv,"WidthXHeight=","WidthXHeight=800x600"
,,system.ini,v7vga.drv,"FontSize=","FontSize=small"

[v7e]
,,system.ini,v7vga.drv,"WidthXHeight=","WidthXHeight=1024x768"
,,system.ini,v7vga.drv,"FontSize=","FontSize=large"

[v7f]
,,system.ini,v7vga.drv,"WidthXHeight=","WidthXHeight=1024x768"
,,system.ini,v7vga.drv,"FontSize=","FontSize=small"

[xgasm]
,,system.ini,XGA_Display,"XGA_Resolution=",
,,system.ini,XGA_Display,"XGA_Resources=","XGA_Resources=1"

[xgalg]
,,system.ini,XGA_Display,"XGA_Resolution=",
,,system.ini,XGA_Display,"XGA_Resources=","XGA_Resources=2"

[xgalo]
,,system.ini,XGA_Display,"XGA_Resolution=","XGA_Resolution=1"
,,system.ini,XGA_Display,"XGA_Resources=","XGA_Resources=1"

[svga640] 
,,system.ini,svga256.drv,"resolution=","resolution=1"
,,system.ini,svga256.drv,"svgamode="
,,system.ini,svga256.drv,"dpi="
,,system.ini,386enh,"SysVMIn2ndBank=","SysVMIn2ndBank=FALSE"

[svga800s]
,,system.ini,svga256.drv,"resolution=","resolution=2"
,,system.ini,svga256.drv,"svgamode="
,,system.ini,svga256.drv,"dpi=","dpi=96"
,,system.ini,386enh,"SysVMIn2ndBank=","SysVMIn2ndBank=FALSE"

[svga800l]
,,system.ini,svga256.drv,"resolution=","resolution=2"
,,system.ini,svga256.drv,"svgamode="
,,system.ini,svga256.drv,"dpi=","dpi=120"
,,system.ini,386enh,"SysVMIn2ndBank=","SysVMIn2ndBank=FALSE"

[svga768s] 
,,system.ini,svga256.drv,"resolution=","resolution=3"
,,system.ini,svga256.drv,"svgamode="
,,system.ini,svga256.drv,"dpi=","dpi=96"
,,system.ini,386enh,"SysVMIn2ndBank=","SysVMIn2ndBank=FALSE"

[svga768l] 
,,system.ini,svga256.drv,"resolution=","resolution=3"
,,system.ini,svga256.drv,"svgamode="
,,system.ini,svga256.drv,"dpi=","dpi=120"
,,system.ini,386enh,"SysVMIn2ndBank=","SysVMIn2ndBank=FALSE"


; copy these fonts depending on the 386 grabber being used
[VGA.3gr]
2:CGA40WOA.FON,2:CGA40WOA.FON
2:CGA80WOA.FON,2:CGA80WOA.FON
2:EGA40WOA.FON,2:EGA40WOA.FON
2:EGA80WOA.FON,2:EGA80WOA.FON

[VGA30.3gr]
2:CGA40WOA.FON,2:CGA40WOA.FON
2:CGA80WOA.FON,2:CGA80WOA.FON
2:EGA40WOA.FON,2:EGA40WOA.FON
2:EGA80WOA.FON,2:EGA80WOA.FON

[V7VGA.3gr]
2:CGA40WOA.FON,2:CGA40WOA.FON
2:CGA80WOA.FON,2:CGA80WOA.FON
2:EGA40WOA.FON,2:EGA40WOA.FON
2:EGA80WOA.FON,2:EGA80WOA.FON

[vgadib.3gr]
2:CGA40WOA.FON,2:CGA40WOA.FON
2:CGA80WOA.FON,2:CGA80WOA.FON
2:EGA40WOA.FON,2:EGA40WOA.FON
2:EGA80WOA.FON,2:EGA80WOA.FON


[keyboard.drivers]
kbd   = 2:keyboard.drv
kbdhp = 2:kbdhp.drv

[keyboard.types]
t3s0alat  = "Wszystkie klaw. typu AT (84 - 86 klawiszy)"       ,nodll
t1s2at&t  = "Klawiatura AT&T '301'"                            ,nodll
t1s4at&t  = "Klawiatura AT&T '302'"                            ,nodll
t4s0enha  = "Klaw. rozszerzona (101 lub 102 klawisze)"         ,nodll
t3s0hp1   = "Klawiatura Hewlett-Packard Vectra (DIN)"          ,nodll
t4s40oliv = "Klawiatura Olivetti 101/102 A"                    ,nodll
t1s0oliv  = "Klawiatura Olivetti (83 klawisze)"                ,nodll
t3s10oliv = "Klawiatura Olivetti (86 klawiszy)"                ,nodll
t2s1oliv  = "Klawiatura Olivetti M24 (102 klawisze)"           ,usadll
t1s42oliv = "Klawiatura PC-XT (83 klawisze)"                   ,nodll
t1s0pcxt  = "Klawiatura PC/XT (84 klawisze)"                   ,nodll

[keyboard.tables]
bridll = 2:kbduk.dll , "Angielski"
nodll  =             , "Amerykański"
usadll = 2:kbdus.dll , "Amerykański"
usddll = 2:kbddv.dll , "Amerykański-Dvorak"
usxdll = 2:kbdusx.dll, "Amerykański międzynarodowy"
beldll = 2:kbdbe.dll , "Belgijski"
blrdll = 2:kbdblr.dll , "Białoruski"
bucdll = 2:kbdbul.dll , "Bułgarski (cyrylica)"
buldll = 2:kbdbll.dll, "Bułgarski (łaciński)"
crdll  = 2:kbdcr.dll , "Chorwacki"
czedll = 2:kbdcz.dll , "Czeski"
czedl1 = 2:kbdcz1.dll, "Czeski (101 klawiszy)"
dandll = 2:kbdda.dll , "Duński"
findll = 2:kbdfi.dll , "Fiński"
fredll = 2:kbdfr.dll , "Francuski"
spadll = 2:kbdsp.dll , "Hiszpański"
dutdll = 2:kbdne.dll , "Holenderski"
icedll = 2:kbdic.dll , "Islandzki"
cafdll = 2:kbdfc.dll , "Kanadyjski francuski"
candll = 2:kbdca.dll , "Kanadyjski wielojęzyczny"
latdll = 2:kbdla.dll , "Latynoamerykański"
gerdll = 2:kbdgr.dll , "Niemiecki"
nordll = 2:kbdno.dll , "Norweski"
poldll = 2:kbdpl.dll , "Polski"
poldl1 = 2:kbdpl1.dll, "Polski (programisty)"
pordll = 2:kbdpo.dll , "Portugalski"
rudll  = 2:kbdru.dll ,  "Rosyjski"
rodll  = 2:kbdro.dll , "Rumuński"
secdll = 2:kbdycc.dll , "Serbski (cyrylica)"
seldll = 2:kbdycl.dll , "Serbski (łaciński)"
slodll = 2:kbdsl.dll , "Słowacki"
slodl1 = 2:kbdsl1.dll, "Słowacki (101 klawiszy)"
svdll  = 2:kbdsv.dll , "Słoweński"
swfdll = 2:kbdsf.dll , "Szwajcarski francuski"
swgdll = 2:kbdsg.dll , "Szwajcarski niemiecki"
swedll = 2:kbdsw.dll , "Szwedzki"
urdll  = 2:kbdur.dll ,  "Ukraiński"
hundll = 2:kbdhu.dll , "Węgierski"
hundl1 = 2:kbdhu1.dll ,"Węgierski (101 klawiszy)"
itadll = 2:kbdit.dll , "Włoski"

[keyboard.switch]
type0 =  , "Bez przełącznika"
type1 = 1, "<Ctrl>+<Lewy Shift> : <Ctrl>+<Prawy Shift>"
type2 = 2, "<Lewy Shift>+<Prawy Shift>"
type3 = 3, "<Prawy Ctrl> (Tylko dla klaw. rozszerzonych)"

[codepages]
;       Xlat Table     OEM Font      WOA Font     Description
437 = 2:xlat852.bin, 2:vgaoem.fon,   2:dosapp.fon, "Amerykańska (437)"
850 = 2:xlat852.bin, 2:vgaoem.fon,   2:dosapp.fon, "Latin I (850)"
852 = 2:xlat852.bin, 2:vgaoem.fon,   2:dosapp.fon, "Środkowoeuropejska (852)"
866 = 2:xlat852.bin, 2:vgaoem.fon,   2:dosapp.fon, "Rosyjska (866)"
; 437 =              ,             , 2:dosapp.fon, "Angielska (437)"

[pointing.device]
;
; Note: the VMD field may contain multiple VXD's in the form "x:*vmd,2:1vmd.386".
;       Please note, however, that if multiple VXD's are specified in the VMD field
;       they must be surrounded by double quotes (").
;
;profile =  mouse driver,   Mouse description,                 VMD,     Optional work section
;
nomouse  = 2:nomouse.drv, "Bez myszy lub innego urządzenia wskazującego", x:*vmd
genius1  = 2:mscmouse.drv,"Mysz szeregowa Genius na COM1"      , 2:mscvmd.386
genius2  = 2:msc3bc2.drv, "Mysz szeregowa Genius na COM2"      , 2:mscvmd.386
lmouse   = 2:lmouse.drv,  "Mysz Logitech",                             2:lvmd.386, lmouse
ps2mouse = 2:mouse.drv,   "Mysz Microsoft lub IBM PS/2",            x:*vmd
msmouse1 = 2:msc3bc2.drv, "Szeregowa mysz Mouse Systems na COM2",2:mscvmd.386
msmouse2 = 2:mscmouse.drv,"Szeregowa lub szynowa mysz Mouse Systems", 2:mscvmd.386

[lmouse]
2:lmouse.com,0:,,,,

[dos.mouse.drivers]
;mouse.sys   = 6:mouse.SYS,     "Program obsługi myszy MS Dos .SYS ver 7.XX"
;mouse.com   = 6:mouse.com,     "Program obsługi myszy MS Dos .COM ver 7.XX"

[dos.drivers]
MSCDEX.EXE  = 8:MSCDEX.EXE,    "Rozszerzenia CD ROM"

[sysfonts]
2:vgasys.fon,"Czcionka systemowa z rozdzielczością VGA (640x480)", "100,96,96"
2:8514sys.fon,"Czcionka systemowa z rozdzielczością 8514/a (1024x768)", "100,120,120"

[fixedfonts]
2:vgafix.fon,"Standardowa czcionka systemowa z rozdzielczością VGA (640x480)", "100,96,96"
2:8514fix.fon,"Standardowa czcionka systemowa z rozdzielczością 8514/a (1024x768)",  "100,120,120"

[oemfonts]
2:vgaoem.fon,"Czcionka Terminalu z rozdzielczością VGA (640x480) (USA/Europa)", "100,96,96",1
2:8514oem.fon,"Czcionka Terminalu z rozdzielczością 8514/a (1024x768) (USA/Europa)", "100,120,120",1

;   The win.copy section is a list of files or sections to copy to the WINDOWS
;   directoy.
;
;   FORMAT      from,to
;
;   IE
;       1:foo.txt,  0:        copy foo.txt from disk 1 to the windows directory
;       #386,       0:system  copy all files in the 386 SECTION to the
;
;
[win.copy.net.win386]
; copy this section for network setup on 386 machines
   #net,       0:

[win.copy.win386]
; copy this section for full setup on 386 machines
   #net,       0:
   #win.shell, 0:
   #pwin386,   0:system
   #mapi,      0:system
   #win.other, 0:system

[net]
   8:CONTROL.SRC,    "Pliki użytkownika Windows"
   5:WINVER
   8:WININIT.EXE,    "Program inicjalizacji systemu"

[win.devices]
; These devices will be copied on all machines
   8:HIMEM.SYS,      "Menedżer pamięci XMS"
   8:SMARTDRV.EXE,   "Program bufora dyskowego (Cache)"
   8:RAMDRIVE.SYS,   "Program dysku wirtualnego RAM Drive"
   8:CONV.DLL,       "Konwerter plików"
   8:WINFILE.INI,    "Konwerter plików"
   8:IFSHLP.SYS,     "Menedżer systemu plików"

[win.devices.win386]
; These devices will be copied on 386 machines only
   8:HIMEM.SYS,      "Menedżer pamięci XMS"
   4:EMM386.EXE,     "Menedżer pamięci rozszerzonej LIM"
   8:SMARTDRV.EXE,   "Program bufora dyskowego (Cache)"
   8:RAMDRIVE.SYS,   "Program dysku wirtualnego RAM Drive"
   8:CONV.DLL,       "Konwerter plików"
   8:WINFILE.INI,    "Konwerter plików"
   8:IFSHLP.SYS,     "Menedżer systemu plików"

[win.other]
   8:WIN87EM.DLL,    "Element systemu Windows"
   8:SYSEDIT.EXE
   8:NDDEAPI.DLL
   4:OLECLI.DLL
   8:OLESVR.DLL
   8:WSWAP.EXE
   6:MIDIMAP.DRV
   8:MIDIMAP.CFG,,noclobber
   8:SND.CPL,,novermsg
   6:MMSYSTEM.DLL
   8:MMTASK.TSK
   5:TIMER.DRV
   8:MCISEQ.DRV
   8:MCIWAVE.DRV
   8:TOOLHELP.DLL
   4:MAIN.CPL
   7:DRIVERS.CPL
   8:SETUP.REG
   4:CONTROL.INF
   8:APPS.INF
   7:DDEML.DLL
   4:NETWORK.INF
   8:WINNET.INF
   8:LM21DRV.UPD
   4:UNIDRV.DLL
   6:UNIDRV.HLP

[mapi]
   4:AB.DLL,    "Element systemu Mail Windows"
   6:DEMILAYR.DLL
   3:FRAMEWRK.DLL
   7:MAILMGR.DLL
   6:MAILSPL.EXE
   6:MAPI.DLL
   4:CMC.DLL
   3:MSSFS.DLL
   7:PABNSP.DLL
   8:SENDFILE.DLL
   3:STORE.DLL
   4:VFORMS.DLL

[win.shell]
   4:PROGMAN.EXE,    "Menedżer programów"
   8:TASKMAN.EXE,    "Aplikacje aktywne"
   3:WINFILE.EXE,    "Menedżer plików"
   5:CLIPBRD.EXE,    "Podgląd Schowka sieciowego"
   8:CLIPSRV.EXE,    "Serwer Schowka sieciowego"
   8:CONTROL.EXE,    "Panel sterowania"
   6:PIFEDIT.EXE,    "Edytor PIF"
   8:REGEDIT.EXE,    "Edytor rejestrów"
   5:PRINTMAN.EXE,   "Menedżer wydruku"
   2:MSD.EXE,        "Program diagnostyczny"
   8:msd.ini
   3:WRITE.EXE,      "Edytor tekstów Write"
   6:WRITE.HLP,      "Pomoc dla Write"
   8:RUSLAT.EXE,     "Wskaźnik klawiatury"
   8:CONV.DLL,       "Konwerter plików"
   8:WINFILE.INI,    "Konwerter plików"
   8:ADD852.EXE,     "Obsługa strony kodowej 852"
   2:ADD852.HLP,     "Pomoc dla Obsługi strony kodowej 852"   ,  12855
   5:moricons.dll,   "Ikony"

[pwin386]
   6:WINOA386.MOD,   "Pliki trybu rozszerzonego 386"
   8:WIN386.PS2
   3:WIN386.EXE
   5:VTDAPI.386
   7:VFAT.386
   8:VCACHE.386
   5:IFSMGR.386
   8:VSHARE.386
   8:VCOMM.386
   8:SERIAL.386
   8:LPT.386
   8:VPMTD.386
   8:IOS.386
   8:VXDLDR.386
   8:RMM.D32

[DelFiles]
;Statically initialize the list of files that will be DELETED during the
;  3.0 to 3.1 up-grade process. Add or remove items from this list at will,
;  (Wildcards accepted in list)
; The first files in the list are deleted from Windows System dir(local setup).
; Nb : Note that DelFiles section always is processed before RenFiles section.
   olecli.dll
   tmsr?.fon
   cga40woa.fon
   sserife.fon
   serife.fon
   modern.fon
   roman.fon
   coure.fon
   script.fon
   smalle.fon
   helv?.fon
   swapfile.exe
   kernel.exe
   shell.dll
   main.cpl
   ..\setup.exe
   progman.exe
   midi.cpl
   _default.pif
      conv.dll
   add852.exe
   kbdview.exe
 ; old network setup .cpl's
   wrkgrp.cpl
   wfwsetup.cpl
   netsetup.cpl
   ; ras 1.0 stuff
   rasconf.cpl
   ; the following files are being renamed after beta2
   ipx32.386
   vmsipx.386
   nbipx.386
   ; Beta2 Dragon components
   apix.386
   ; Various names for old Windows SETUP.EXE
   SETUP.EXE
   INSTALL.EXE
   ASETTA.EXE
   CONFIG.EXE
   INSTALAR.EXE
   KURMA.EXE
   WINSETUP.EXE
; All files in the list AFTER this point will be deleted from Windows dir.
; WARNING: The "..\" is needed, the code depends on it!!!
   ..\gdi.exe
   ..\arial*.ttf
   ..\arial*.fot
   ..\cour*.ttf
   ..\cour*.fot
   ..\times*.ttf
   ..\times*.fot
   ..\setup.inf
   shell.dll
   olecli.dll
   olesvr.dll
   commdlg.dll
   ver.dll
   toolhelp.dll
   *.pcl
   3270.txt
   networks.txt
   printers.txt
   readme.txt
   sysini?.txt
   winini?.txt
   ; ras 1.0 stuff
   rasadmin.exe
   rasphone.exe
   rasphone.hlp
   rasphone.pif
   rasadmin.hlp
   rasadmin.ico
   rasphone.msg
   rasdial.exe
   rashelp.msg
   rasload.bat
   rashelp.exe
   rasconf.hlp
   rasphone.ico
   modems.inf
   comdev.ini
   ; Various names for old Windows SETUP.EXE
   SETUP.EXE
   INSTALL.EXE
   ASETTA.EXE
   CONFIG.EXE
   INSTALAR.EXE
   KURMA.EXE
   WINSETUP.EXE

[RenFiles]
; Similar section but for file renaming to create .bak if needed
   ADLIB.DRV,MSADLIB.DRV
   MSCDEX.EXE,MSCDEX.OLD


; The win.apps, win.games, win.scrs, win.bmps, and win.readme sections are
; all formatted as described below.
;
; X:FileName,      Description,     FileSize,   Profile String
;
; Where profile string is used by setup.exe to "lookup" the item in the
; appropiate progman groups section to determine if and how the item is
; to be added to a Program manager group via DDE. The profile string is
; also used to "lookup" and needed dependent files in the [win.dependents]
; section.
;
[win.apps]
   6:CALC.EXE,     "Kalkulator"                ,  43344, calc
   4:CARDFILE.EXE, "Kartoteka"                 ,  95232, cardfile
   8:CLOCK.EXE,    "Zegar"                     ,  16832, clock
   8:NOTEPAD.EXE,  "Notatnik"                  ,  33584, notepad
   4:PBRUSH.EXE,   "Paintbrush"                , 190814, pbrush
   3:TERMINAL.EXE, "Terminal"                  , 148304, terminal
   8:CALC.HLP,     "Pomoc dla Kalkulatora"     ,  18076
   8:CARDFILE.HLP, "Pomoc dla Kartoteki"       ,  24810
   8:NOTEPAD.HLP,  "Pomoc dla Notatnika"       ,  14897
   6:PBRUSH.HLP,   "Pomoc dla Paintbrush"      ,  40269
   6:RECORDER.EXE, "Rejestrator"               ,  53310, recorder
   8:RECORDER.HLP, "Pomoc dla Rejestratora"    ,  18200
   7:TERMINAL.HLP, "Pomoc dla Terminalu"       ,  36279
   5:PACKAGER.EXE, "Pakowarka"                 ,  77120, packager
   8:PACKAGER.HLP, "Pomoc dla Pakowarki"       ,  22681
   8:CHARMAP.EXE,  "Tablica znaków"            ,  22016, charmap
   8:CHARMAP.HLP,  "Pomoc dla Tablicy znaków"  ,  10998
   3:MPLAYER.EXE,  "Media"                     ,  33728, mplayer, novermsg
   3:MPLAYER.HLP,  "Pomoc dla Media"           ,  13298
   6:SOUNDREC.EXE, "Rejestrator dźwięku"       ,  51817, soundrec
   8:SOUNDREC.HLP, "Pomoc dla Rejestratora dźwięku"         ,  17776
   6:PIFEDIT.HLP,  "Pomoc dla Edytora PIF"     ,  38392
   4:PRINTMAN.HLP, "Pomoc dla Menedżera wydruku"            ,  64921
   6:PROGMAN.HLP,  "Pomoc dla Menedżera programów"          ,  33117
   7:CLIPBRD.HLP,  "Pomoc dla Podglądu Schowka sieciowego"  ,  32088
   8:REGEDIT.HLP,  "Pomoc dla Edytora rejestrów"            ,  24177
   8:REGEDITV.HLP, "Zaawansowana Pomoc dla Edytora rejestrów",  17314
   4:WINFILE.HLP,  "Pomoc dla Menedżera plików"             ,  91327
   4:WINTUTOR.EXE, "Samouczek Windows"         , 182867, wintutor
   2:WINHELP.HLP,  "Pomoc dla programu obsługi Pomocy"      ,  28171
   2:GLOSSARY.HLP, "Pomoc dla Słownika"        ,  62154
   2:EXPAND.EXE,   "Program rozpakowujący"     ,  16553
   8:KBDVIEW.EXE,  "Układ klawiatury"          ,  25088, kbdview
   8:RASSTART.EXE, "Remote Access"             ,  13312, rasmac
   3:MSMAIL.EXE,   "Mail"                           , 639344, msmail
   4:MSMAIL.HLP,   "Pomoc dla Mail"                 ,  78713
   2:SCHDPLUS.EXE, "Schedule+"                      , 746704, schdplus
   4:SCHDPLUS.HLP, "Pomoc dla Schedule+"            , 104115
   8:FAXMGR.EXE,   "Microsoft At Work Fax"          ,  1065248, msfax
   6:MSFAX.HLP,    "Pomoc dla Microsoft At Work Fax",  34666
   diskspace=4281656

[win.dependents]
pbrush   = 8:PBRUSH.DLL
recorder = 8:RECORDER.DLL
wintutor = 4:WINTUTOR.DAT
hearts   = #hearts
msmail   = #msmail
schdplus = #sched
msfax    = #faxsys, 0:system, #msfax

[hearts]
   4:CARDS.DLL,,nodelete

[msmail]
   4:SCHEDMSG.DLL, "Progamy obsługi aplikacji Mail"
   4:WGPOMGR.DLL
   6:IMPEXP.DLL
   4:FAXVIEW.EXE,  "FAX Viewer", nodelete

[sched]
   8:MSREMIND.EXE, "Programy obsługi aplikacji Schedule+"
   3:MSSCHED.DLL
   8:TRNSCHED.DLL
   
[faxsys]
   8:FAXNSP.DLL,    "Programy obsługi aplikacji PC Fax"
   3:FAX.CPL
   6:FAXSTUB.DLL
   7:EFAXDRV.DRV

[msfax]
   8:AWCLASS1.DLL,    "Programy obsługi aplikacji PC Fax"
   8:AWCLASS2.DLL
   8:DLLSCHED.DLL
   8:AWCAS.DLL
   4:EFAXPUMP.DLL
   8:EFAXRUN.DLL
   8:AWFXPROT.DLL
   8:FAXCODEC.DLL
   8:AWFAXIO.DLL
   8:FAXCOVER.DLL,
   4:FAXOPT.DLL,,nodelete
   8:IFKERNEL.DLL
   8:KEYVIEW.EXE,
   8:LINEARIZ.DLL
   8:NETFAX.DLL
   8:SIGVIEW.EXE,
   6:AWT30.DLL
   8:TRNOFF.DLL
   3:MSMAIL.EXE,    "Programy obsługi aplikacji Mail i Fax", nodelete
   4:SCHEDMSG.DLL,,nodelete
   4:WGPOMGR.DLL,,nodelete
   6:IMPEXP.DLL,,nodelete
   4:FAXVIEW.EXE,   "FAX Viewer", nodelete

[win.games]
   4:SOL.EXE,      "Pasjans"            , 180976, sol
   8:WINMINE.EXE,  "Saper"              ,  28048, winmine
   8:SOL.HLP,      "Pomoc dla Pasjansa" ,  13753
   8:WINMINE.HLP,  "Pomoc dla Sapera"   ,  12754
   4:MSHEARTS.EXE, "Hearts"             , 263728, hearts
   8:MSHEARTS.HLP, "Pomoc dla Hearts"   ,  14126
   diskspace=513385

[win.scrs]
   8:SCRNSAVE.SCR, "Standardowy wygaszacz ekranu" ,   5664
   8:SSMARQUE.SCR, "Neon"                         ,  17168
   8:SSSTARS.SCR,  "Droga Mleczna"                ,  17792
   8:ssflywin.scr, "Latające znaki Windows"       ,  16432
   diskspace=57056

[win.bmps]
   8:ARCADE.BMP,   "Szachownica"                      ,    630
   8:ARGYLE.BMP,   "Kratka"                           ,    630
   8:CASTLE.BMP,   "Mur"                              ,    778
   8:EGYPT.BMP,    "Egipt"                            ,    630
   8:HONEY.BMP,    "Plaster miodu"                    ,    854
   8:RIVETS.BMP,   "Nity"                             ,    630
   8:REDBRICK.BMP, "Czerwona cegła"                   ,    630
   8:SQUARES.BMP,  "Kwadraty"                         ,    630
   8:THATCH.BMP,   "Strzecha"                         ,    598
   8:WINLOGO.BMP,  "Znaki Windows"                    ,  38518
   8:ZIGZAG.BMP,   "Zygzaki"                          ,    630
   8:ding.wav,     "Dzwon"                            ,  11598
   8:chimes.wav,   "Dzwoneczki"                       ,  15920
   8:canyon.mid,   "Piosenka Canyon dla MIDI"         ,  33883
   8:ringin.wav,   "Dzwonek telefonu przychodzącego"  ,  10026
   8:ringout.wav,  "Dzwonek telefonu wychodzącego"    ,   5212
   diskspace=121797

[win.readme]
   3:readme.wri,   "Informacje"               , 109696, readme
   3:networks.wri, "Sieci"                    ,  95872
   3:winini.wri,   "Win.ini"                  ,  31488
   3:sysini.wri,   "System.ini"               ,  94720
   3:printers.wri, "Drukarki"                 ,  62464
   3:printer2.wri, "Dodatkowe drukarki"       ,     13440
   8:mail.wri,     "Informacje o Mail"        ,  48384
   diskspace=456064

; The [*.groups] sections maps a group section to the group name used in
; Program Manager.
;
; Section Name = Progman group name, Min/Max switch. ( 1 = Max, nothing = Min).
;
; This section is used for upgrading from 3.X to 3.1.
[new.groups]
group7=Grupa główna,1
group2=Akcesoria
group8=Sieć
group6=Gry
group1=Autostart

; This section is for new install.
[progman.groups]
group3=Grupa główna,1
group4=Akcesoria
group8=Sieć
group5=Gry
group1=Autostart

; Progman DDE control section. This section controls the progman DDE and defines which
; .exe's will be added to which groups. The [progman.groups] sections lists section
; names that each describe the contents of that group.
;
; Description string,  .EXE name, Icon extraction .EXE, Icon extraction index, profile
;
; If the profile field is left NULL, the item will always be added to the group. Otherwise
; the item will only be added if it was installed via the partial install dlg.
;
;
; NOTE: If EXE name is NULL item will be deleted from the group if it exists there.
;

[group3]
"Menedżer plików",               WINFILE.EXE
"Panel sterowania",              CONTROL.EXE
"Menedżer wydruku",              PRINTMAN.EXE
"Podgląd Schowka sieciowego",    CLIPBRD.EXE
"MS-DOS",                        DOSPRMPT.PIF, PROGMAN.EXE, 9
"Program instalacyjny Windows",  WINSETUP.EXE
"Obsługa strony kodowej 852",    add852.exe
"Edytor PIF",                    PIFEDIT.EXE
"Informacje"
"Informacje",                    README.WRI,,,                              readme
"Schowek"
"Podgląd Schowka"
"DOS"
"Samouczek"

[group4]
"Write",            WRITE.EXE
"Paintbrush",       PBRUSH.EXE,,,                              pbrush
"Terminal",         TERMINAL.EXE,,,                            terminal
"Notatnik",         NOTEPAD.EXE,,,                             notepad
"Rejestrator",      RECORDER.EXE,,,                            recorder
"Kartoteka",        CARDFILE.EXE,,,                            cardfile
"Kalkulator",       CALC.EXE,,,                                calc
"Zegar",            CLOCK.EXE,,,                               clock
"Pakowarka",        PACKAGER.EXE,,,                            packager
"Tablica znaków",   CHARMAP.EXE,,,                             charmap
"Media",            MPLAYER.EXE,,,                             mplayer
"Rejestrator dźwięku",SOUNDREC.EXE,,,                            soundrec
"Układ klawiatury", KBDVIEW.EXE,,,                             kbdview
"Wskaźnik klawiatury","ruslat.exe"
"Edytor PIF"
; Remove old network icons
"Rozmowa"
"WinMeter"
"Monitor sieci"
"WinPopup"
"Stan dysku wirtualnego"
"Fast Mail"
"Edytor listy haseł"
"Message Popup"

[group5]
"Pasjans",          SOL.EXE,,,                                 sol
"Saper",            WINMINE.EXE,,,                             winmine
"Hearts",           MSHEARTS.EXE,,,                            hearts
; Remove old icons
"FreeCell"

[group1]
"Obsługa strony kodowej 852",    "add852.exe /A"
"Wskaźnik klawiatury","ruslat.exe"
"Dr. Watson"

[group2]
"Pakowarka",        PACKAGER.EXE,,,                            packager
"Tablica znaków",   CHARMAP.EXE,,,                             charmap
"Media",            MPLAYER.EXE,,,                             mplayer
"Rejestrator dźwięku",SOUNDREC.EXE,,,                            soundrec
"Edytor PIF"
"Write",            WRITE.EXE
"Układ klawiatury",  KBDVIEW.EXE,,,                            kbdview
"Wskażnik klawiatury","ruslat.exe"
; Remove old network icons
"Rozmowa"
"WinMeter"
"Monitor sieci"
"WinPopup"
"Stan dysku wirtualnego"
"Fast Mail"
"Edytor listy haseł"
"Message Popup"

[group6]
"Pasjans",          SOL.EXE,,,                                 sol
"Saper",            WINMINE.EXE,,,                             winmine
"Hearts",           MSHEARTS.EXE,,,                            hearts
; Remove old icons
"FreeCell"

[group7]
"Schowek"
"Podgląd Schowka"
"Podgląd Schowka sieciowego",   CLIPBRD.EXE
"Program instalacyjny Windows", WINSETUP.EXE
"Edytor PIF",                   PIFEDIT.EXE
"Informacje"
"DOS"
"MS-DOS",                       DOSPRMPT.PIF, PROGMAN.EXE, 9
"Informacje",                   README.WRI,,,                              readme
"Obsługa strony kodowej 852",   add852.exe
"Samouczek"

[group8]
"Instalacja i konfiguracja sieci",   "WINSETUP.EXE /Z",,,
"Mail",             MSMAIL.EXE,,,                              msmail
"Mail",             MSMAIL.EXE,,,                              msfax
"Schedule+",        SCHDPLUS.EXE,,,                            schdplus
"Remote Access",    RASSTART.EXE,,,                            rasmac
; Remove old network icons
"Message Popup"

[fonts]
   7:SSERIFE.FON, "MS Sans Serif 8,10,12,14,18,24 (rozdz. VGA)", "100,96,96"
   6:SSERIFF.FON, "MS Sans Serif 8,10,12,14,18,24 (rozdz. 8514/a)", "100,120,120"

   8:COURE.FON, "Courier 10,12,15 (rozdz. VGA)", "100,96,96"
   8:COURF.FON, "Courier 10,12,15 (rozdz. 8514/a)", "100,120,120"

   7:SERIFE.FON, "MS Serif 8,10,12,14,18,24 (rozdz. VGA)", "100,96,96"
   6:SERIFF.FON, "MS Serif 8,10,12,14,18,24 (rozdz. 8514/a)", "100,120,120"

   7:SYMBOLE.FON, "Symbol 8,10,12,14,18,24 (rozdz. VGA)", "100,96,96"
   6:SYMBOLF.FON, "Symbol 8,10,12,14,18,24 (rozdz. 8514/a)", "100,120,120"

   8:SMALLE.FON, "Small Fonts (rozdz. VGA)", "100,96,96"
   8:SMALLF.FON, "Small Fonts (rozdz. 8514/a)", "100,120,120"

   8:ROMAN.FON, "Roman (Ploter)",   "CONTINUOUSSCALING"
   8:SCRIPT.FON, "Script (Ploter)", "CONTINUOUSSCALING"
   8:MODERN.FON, "Modern (Ploter)", "CONTINUOUSSCALING"

[ttfonts]
;
;Font Header file, Description string,       Font file,     FontFamily/Flags
;
; Flags:  0000 = Normal weighted font.
;         0100 = Bolded font.
;         1000 = Italic font.
; NOTE: Flags not currently used.
;
; NOTE: The first letter of each word in the font desctiption string needs
;       to be capitalized.
;
5:ARIAL.FOT,   "Arial (TrueType)",                       5:arial.ttf,   ""
5:ARIALBD.FOT, "Arial pogrubiony (TrueType)",                  5:arialbd.ttf,  "Arial0100"
5:ARIALBI.FOT, "Arial pogrubiona kursywa (TrueType)",           5:arialbi.ttf, "Arial1100"
5:ARIALI.FOT,  "Arial kursywa (TrueType)",                5:ariali.ttf,  "Arial1000"
5:CEARIAL.FOT, "Arial CE (TrueType)",                       5:cearial.ttf, ""
5:CEARIABD.FOT,"Arial CE pogrubiony (TrueType)",                    5:ceariabd.ttf,"Arial CE0100"
5:CEARIABI.FOT,"Arial CE pogrubiona kursywa (TrueType)",            5:ceariabi.ttf,"Arial CE1100"
5:CEARIALI.FOT,"Arial CE kursywa (TrueType)",               5:ceariali.ttf,"Arial CE1000"
5:ARICYR.FOT,  "Arial Cyr (TrueType)",                      5:ARICYR.TTF,  ""
5:ARICYRB.FOT, "Arial Cyr pogrubiony (TrueType)",                   5:ARICYRB.TTF, "Arial Cyr0100"
5:ARICYRBI.FOT,"Arial Cyr pogrubiona kursywa (TrueType)",           5:ARICYRBI.TTF,"Arial Cyr1100"
5:ARICYRI.FOT, "Arial Cyr kursywa (TrueType)",              6:ARICYRI.TTF, "Arial Cyr1000"
5:COUR.FOT,    "Courier New (TrueType)",                 5:cour.ttf,    ""
5:COURBD.FOT,  "Courier New pogrubiony (TrueType)",            5:courbd.ttf,  "Courier0100"
5:COURBI.FOT,  "Courier New pogrubiona kursywa (TrueType)",     5:courbi.ttf,  "Courier1100"
5:COURI.FOT,   "Courier New kursywa (TrueType)",          5:couri.ttf,   "Courier1000"
5:CECOUR.FOT,  "Courier New CE (TrueType)",                5:cecour.ttf,  ""
5:CECOURBD.FOT,"Courier New CE pogrubiony (TrueType)",      5:cecourbd.ttf,"Courier CE0100"
5:CECOURBI.FOT,"Courier New CE pogrubiona kursywa (TrueType)",     5:cecourbi.ttf,"Courier CE1100"
5:CECOURI.FOT, "Courier New CE kursywa (TrueType)",         5:cecouri.ttf, "Courier CE1000"
5:COUCYR.FOT,  "Courier New Cyr (TrueType)",                6:COUCYR.TTF,  ""
5:COUCYRB.FOT, "Courier New Cyr pogrubiony (TrueType)",     6:COUCYRB.TTF, "Courier Cyr0100",
5:COUCYRBI.FOT,"Courier New Cyr pogrubiona kursywa (TrueType)",    6:COUCYRBI.TTF,"Courier Cyr1100",
5:COUCYRI.FOT, "Courier New Cyr kursywa (TrueType)",        6:COUCYRI.TTF, "Courier Cyr1000",
5:TIMES.FOT,   "Times New Roman (TrueType)",             6:times.ttf,   ""
5:TIMESBD.FOT, "Times New Roman pogrubiony (TrueType)",        5:timesbd.ttf, "Times New Roman0100"
5:TIMESBI.FOT, "Times New Roman pogrubiona kursywa (TrueType)", 5:timesbi.ttf, "Times New Roman1100"
5:TIMESI.FOT,  "Times New Roman kursywa (TrueType)",      5:timesi.ttf,  "Times New Roman1000"
5:CETIMES.FOT, "Times New Roman CE (TrueType)",            5:cetimes.ttf, ""
5:CETIMEBD.FOT,"Times New Roman CE pogrubiony (TrueType)",          5:cetimebd.ttf,"Times New Roman CE0100"
5:CETIMEBI.FOT,"Times New Roman CE pogrubiona kursywa (TrueType)", 5:cetimebi.ttf,"Times New Roman CE1100"
5:CETIMESI.FOT,"Times New Roman CE kursywa (TrueType)",     5:cetimesi.ttf,"Times New Roman CE1000"
5:TIMCYR.FOT,  "Times New Roman Cyr (TrueType)",            6:TIMCYR.TTF,  ""
5:TIMCYRB.FOT, "Times New Roman Cyr pogrubiony (TrueType)",         6:TIMCYRB.TTF, "Times NR Cyr0100"
5:TIMCYRBI.FOT,"Times New Roman Cyr pogrubiona kursywa (TrueType)",6:TIMCYRBI.TTF,"Times NR Cyr1100"
5:TIMCYRI.FOT, "Times New Roman Cyr kursywa (TrueType)",    6:TIMCYRI.TTF, "Times NR Cyr1000"
5:SYMBOL.FOT,  "Symbol (TrueType)",                      5:symbol.ttf,  ""
5:WINGDING.FOT,"WingDings (TrueType)",                   5:wingding.ttf,""

; If any of these drivers are found in the config.sys file, Setup removes them.
[compatibility]
icache.sys
ibmcache.sys
cache.sys
cache.exe
mcache.sys
fast512.sys

; Known TSRs and drivers which may result in a hang or crash
; during execution of Setup or Windows.
;
; filename = description string
[incompTSR1]
ep.exe      = "Norton Desktop/Windows Erase Protect TSR"
qmaps.sys   = "QMAPS Memory Manager"
qcache.exe  = "386 Max Disk Cache Utility"
cache.exe   = "Disk Cache Utility"
flash.exe   = "Flash Disk Cache Utility"
hyper386.exe= "Hyper Disk Cache Utility"
hyperdkx.exe= "Hyper Disk Cache Utility"
hyper286.exe= "Hyper Disk Cache Utility"
hyperdke.exe= "Hyper Disk Cache Utility"
hyperdkc.exe= "Hyper Disk Cache Utility"
ncache.exe  = "Norton Disk Cache Utility"
ncache2.exe  = "Norton Utilities NCache"
speeddrv.exe  = "Norton Speed Drive"
pc-kwik.exe = "PC-Kwik Disk Cache Utility"
pc-cache.com= "PC Tools Disk Cache Utility"
superpck.exe= "Super PC-Kwik Disk Cache Utility"
vdisk.sys   = "IBM RAM Disk Utility"
allemm4.sys="All Charge 386"
anarkey.com="Anarkey"
vsafe.sys = "Central Point Anti-Virus"
vsafe.com = "Central Point Anti-Virus TSR"
vdefend.sys="PC Tools VDefend"
vdefend.com="PC Tools VDefend"
kbflow.exe="KBFlow TSR by Artisoft"
s-ice.exe="SoftIce"
desktop.exe="PC Tools Desktop TSR"
sk2.exe="Sidekick Version 2.0"
sk.com="Sidekick Version 1.0"
skplus.exe="Sidekick Plus"
print.exe="MS-DOS PRINT Utility"
pyro.exe="Pyro! Screen Saver"
xgaaidos.sys="8514 emulation driver "
asplogin.exe="ASP Integrity Toolkit"
lsallow.exe="Lansight Network Utilities TSR"
lansel.exe="Lansight Network Utilities TSR"
vaccine.exe="Vaccine Antivirus Program"
newspace.exe="Newspace Disk Compression Utility"
newres.exe="Newspace Disk Compression Utility"
tscsi.sys="Trantor T100  SCSI driver"
pcpanel.exe="Lasertools Printer Control Panel"
hpemm386.sys = "HP Expanded Memory Manager"
hpemm486.sys = "HP Expanded Memory Manager"
ramtype.sys  = "Ramtype Utility"
iemm.sys     = "Memory Manager"
ilim386.sys  = "Intel Expanded Memory Emulator"
cmdedit.com  = "Command Line Editor"
hpmm.sys     = "HP Memory Manager"
ced.exe      = "PCED Command Line Editor"
ced.com      = "CED Command Line Editor"
umbpro.sys   = "UMB Pro Memory Manager"
rm386.sys    = "NetRoom Memory Manager"
eimpcs.sys   = "IBM PC Support"
ecyddx.sys   = "IBM PC Support"

; Known TSRs and device drivers which can(!) potentially cause problems
; if running during Setup or Windows
;
; filename = description string
[incompTSR2]
ndosedit.com  = "Command Line Editor"
doscue.com="DOSCUE Command Line Editor"
datamon.exe="PC Tools Datamon"
subst.exe="MS-DOS SUBST Utility"
join.exe="MS-DOS JOIN Utility"
viralert.sys="Data Physician Plus TSR"
graphics.com="MS-DOS GRAPHICS Utility"
le.com="Le Menu Menuing Package"
assign.com="MS-DOS ASSIGN Utility"
append.com="MS-DOS APPEND Utility"
diskmon.exe="Norton Disk Monitoring TSR"
dubldisk.sys="Double Disk Data Compression Utility"
pa.exe = "Printer Assist"
speedfxr.com = "Speedfxr"
pcsxmaem.sys = "pcsxmaem Utility"
xmaem.sys    = "xmaem Utility"
cubitr.exe   = "Cubit"

[block_devices]
tscsi.sys
tcscsi.sys
atdosxl.sys
dmdrvr.bin
drdrive.sys

[Installable.Drivers]
; key         = filename,       type(s),     description, VxD(s), Default Params
msadlib       = 5:msadlib.drv,  "MIDI",      "Ad Lib", 5:vadlibd.386,
lapc1         = 8:mpu401.drv,   "MIDI",      "Roland LAPC1",,
midimapper    = 6:midimap.drv,  "MidiMapper", "MIDI Mapper",,
mpu401        = 8:mpu401.drv,   "MIDI",      "Roland MPU-401",,
sequencer     = 8:mciseq.drv,   "Sequencer", "[MCI] MIDI Sequencer",,
soundblaster  = 5:sndblst.drv,  "Wave,MIDI", "Creative Labs Sound Blaster 1.0", 5:vsbd.386,, msadlib
soundblaster2 = 5:sndblst2.drv, "Wave,MIDI", "Creative Labs Sound Blaster 1.5", 5:vsbd.386,, msadlib
timer         = 5:timer.drv,    "Timer",     "Timer", 5:vtdapi.386,
thunder       = 5:sndblst2.drv, "Wave", "Media Vision Thunder Board", 5:vsbd.386,, msadlib
wave          = 8:mciwave.drv,  "WaveAudio", "[MCI] Sound",, "4"
cdaudio       = 8:mcicda.drv,   "CDAudio",   "[MCI] CD Audio",,

; This section translates Windows 3.0 OEMSETUP.INF entries to their 3.1
; equivalents. The disk names should be the first entries in the list.

[translate]
WinDiskName=26,"Dyskietka Microsoft Windows 3.0"
WinDiskName=14,"Windows Dyskietka nr "
*vddvga=2:vddvga30.386
vgalogo.lgo=2:vgalogo.lgo
vgalogo.rle=2:vgalogo.rle
rgdi.lgo=2:vgalogo.lgo
rgdi.rle=2:vgalogo.rle
vga.gr3=2:vga30.3gr
v7vga.gr3=2:v7vga.3gr
cga40woa.fon=2:cga40woa.fon
cga40850.fon=2:cga40woa.fon
cga80woa.fon=2:cga80woa.fon
cga80850.fon=2:cga80woa.fon
ega40woa.fon=2:ega40woa.fon
ega40850.fon=2:ega40woa.fon
ega80woa.fon=2:ega80woa.fon
ega80850.fon=2:ega80woa.fon
vgasys.fon=2:vgasys.fon
vgafix.fon=2:vgafix.fon
vgaoem.fon=2:vgaoem.fon
8514sys.fon=2:8514sys.fon
8514fix.fon=2:8514fix.fon
8514oem.fon=2:8514oem.fon
helve.fon=7:sserife.fon
helvf.fon=6:sseriff.fon
coure.fon=8:coure.fon
courf.fon=8:courf.fon
tmsre.fon=7:serife.fon
tmsrf.fon=6:seriff.fon
symbole.fon=7:symbole.fon
symbolf.fon=6:symbolf.fon
roman.fon=8:roman.fon
script.fon=8:script.fon
modern.fon=8:modern.fon
kbduk.dll=2:kbduk.dll
xlat852.bin=2:xlat852.bin
vga852.fon=2:vgaoem.fon
win.cnf=1:win.cnf

; Used to update files that already exist on the disk
;
[Update.Files]
0:system,5:sndblst.drv
0:system,5:sndblst2.drv
0:system,8:mpu401.drv
0:system,5:msadlib.drv
0:system,5:vtdapi.386
0:system,5:vsbd.386
0:system,5:vadlibd.386
0:system,8:mcicda.drv
0:system,8:cpqgr3.exe
0:system,8:cpqvga.gr3
0:system,6:pscript.drv

; Used to update dependents of files in the [Update.Files] section.
;
[Update.Dependents]
msadlib.drv = 5:vadlibd.386
sndblst.drv = 5:vsbd.386
sndblst2.drv = 5:vsbd.386

; This section is processed by both the DOS and WINDOWS portions of setup
; for temporarily renaming profile strings during setup. THE RENAME
; OPERATION WILL ONLY TAKE PLACE IF THE ORIGINAL PROFILE STRING EXISTS AND HAS
; A RIGHT HAND SIDE STRING.
;
; .ini file,  section name, temporary profile name, Original profile name.
;
[ini.upd.patches]
  system.ini, Boot,    "olddrivers"    ,"drivers"
  win.ini   , Desktop, "oldwallpaper"  ,"wallpaper"
  system.ini, Boot,    "oldtaskman"    ,"taskman.exe"
  system.ini, Boot,    "wfwshell"      ,"shell"

[setupdisplay]
mach32.drv=2:vga.drv
cirrus.drv=2:svga256.drv
wd.drv=2:svga256.drv
framebuf.drv=2:svga256.drv
tseng.drv=2:svga256.drv
linear8.drv=2:vga.drv
cpqavga.drv=2:vga.drv
ht256sf.drv=2:vga.drv
orchidf.drv=2:vga.drv
s3.drv=2:vga.drv
s3?.drv=2:vga.drv
s3??.drv=2:vga.drv
s3???.drv=2:vga.drv
s3????.drv=2:vga.drv
s3?????.drv=2:vga.drv
s3??????.drv=2:vga.drv
viper_??.drv=2:vga.drv
mach-??.drv=2:vga.drv
m32-??.drv=2:vga.drv

[setupdisplay.fon]
fonts.fon=2:vgasys.fon
fixedfon.fon=2:vgafix.fon
oemfonts.fon=2:vgaoem.fon

; Used by the windows half to shrink the memory needed to hold this pig.
;
[blowaway]
   this line needed

[ini.upd.31]
;
; WARNING: This section only works on win.ini or system.ini !!
;
; .ini file,  section,  old line to be replaced,  new line,  rename operater.
;
; If the "old line to be replaced" field is empty, setup will assume that
; the new line is to be added. The rename operater tells setup to retain the RHS
; of the profile. This is used as a renaming mechanism during upgrades.
; Nb : Simple string substitution is implemented :
;     ?P means any valid MS-DOS path
;
  system.ini, Boot,    "wincodepage="             ,   "wincodepage=1250"
  system.ini, Boot,                               ,   "taskman.exe="
  system.ini, mci,     "waveaudio="               ,   "WaveAudio=mciwave.drv"
  system.ini, mci,     "sequencer="               ,   "Sequencer=mciseq.drv"
  system.ini, mci,     "cdaudio="                 ,   "CDAudio=mcicda.drv"
  system.ini, drivers,                            ,   "timer=timer.drv"
  system.ini, drivers,         "midimapper="      ,   "midimapper=midimap.drv"
  system.ini, drivers, "midi=adlib.drv"           ,   "midi=msadlib.drv"          ,rename
  system.ini, drivers, "midi1=adlib.drv"          ,   "midi1=msadlib.drv"         ,rename
  system.ini, drivers, "midi2=adlib.drv"          ,   "midi2=msadlib.drv"         ,rename
  system.ini, drivers, "midi3=adlib.drv"          ,   "midi3=msadlib.drv"         ,rename
  system.ini, drivers, "midi4=adlib.drv"          ,   "midi4=msadlib.drv"         ,rename
  system.ini, 386Enh,       "keyboard=?Pbpvkd.386",
  system.ini, 386Enh,          "keyboard="        ,   "keyboard=*vkd"             ,noclobber
  system.ini, 386Enh,       "device=vpicda.386"   ,   "device=*vpicd"
  system.ini, 386Enh,       "device=vpicd.386"    ,   "device=*vpicd"
  system.ini, 386Enh,                             ,   "device=ifsmgr.386"
  system.ini, 386Enh,                             ,   "device=vcache.386"
  system.ini, vcache,       "minfilecache="       ,   "minfilecache=512", noclobber
  system.ini, 386Enh,       "device=?Pvshare.386" ,   "device=vshare.386"
  system.ini, 386Enh,          "device=*vhd"      ,   "device=*BLOCKDEV", rename
  system.ini, 386Enh,          "device=apix.386"
  system.ini, 386Enh,          "device=*vpd"      ,
  system.ini, 386Enh,          "device=vpd.386"   ,   
  system.ini, 386Enh,          "device=vdmad.386" ,   "device=*vdmad"
  system.ini, 386Enh,          "device=vdmadx.386",   "device=*vdmad"
  system.ini, 386Enh,          "device=vcd.386"   ,   "device=*vcd", rename
  system.ini, 386Enh,       "device=vndis2d.386"  ,   
  system.ini, 386Enh,                             ,   "device=*pagefile"
  system.ini, 386Enh,       "device=?Pvtdapi.386" ,   "device=vtdapi.386"
  system.ini, 386Enh,                             ,   "device=vcomm.386"
  system.ini, 386Enh,       "device=ns8250.386"   ,   "device=serial.386"
  system.ini, 386Enh,                             ,   "device=serial.386"
  system.ini, 386Enh,       "device=comlpt.386"   ,   "device=lpt.386"
  system.ini, 386Enh,                             ,   "device=lpt.386"
  system.ini, 386Enh,                             ,   "device=vpmtd.386"
  system.ini, NonWindowsApp,"localtsrs="          ,   "localtsrs=dosedit,ced"  ,noclobber
  system.ini, 386Enh,       "COM3Irq="            ,   "COM3Irq=4", noclobber
  system.ini, 386Enh,       "COM3Base="           ,   "COM3Base=03E8", noclobber
  system.ini, 386Enh,       "COM4Irq="            ,   "COM4Irq=3", noclobber
  system.ini, 386Enh,       "COM4Base="           ,   "COM4Base=02E8", noclobber
  win.ini   , Sounds,  "SystemDefault="           ,   "SystemDefault=ding.wav, Default Beep"      ,noclobber
  win.ini   , Sounds,  "SystemExclamation="       ,   "SystemExclamation=ding.wav, Exclamation"  ,noclobber
  win.ini   , Sounds,  "SystemStart="             ,   "SystemStart=chimes.wav, Windows Start"       ,noclobber
  win.ini   , Sounds,  "SystemExit="              ,   "SystemExit=chimes.wav, Windows Exit"       ,noclobber
  win.ini   , Sounds,  "SystemHand="              ,   "SystemHand=ding.wav, Critical Stop"       ,noclobber
  win.ini   , Sounds,  "SystemQuestion="          ,   "SystemQuestion=ding.wav, Question"        ,noclobber
  win.ini   , Sounds,  "SystemAsterisk="          ,   "SystemAsterisk=ding.wav, Asterisk"        ,noclobber
  win.ini   , "mci extensions",                   ,   "wav=waveaudio"
  win.ini   , "mci extensions",                   ,   "mid=sequencer"
  win.ini   , "mci extensions",                   ,   "rmi=sequencer"
  win.ini   , FontSubstitutes,                    ,   "Helv=MS Sans Serif"
  win.ini   , FontSubstitutes,                    ,   "Tms Rmn=MS Serif"
  win.ini   , FontSubstitutes, "Courier=Courier New" ,
  win.ini   , FontSubstitutes,                    ,   "Times=Times New Roman"
  win.ini   , FontSubstitutes,                    ,   "Helvetica=Arial"
  ;
  ; Remove these Win 3.0 font entries from win.ini because they have either
  ; been replaced or removed for Win 3.1
  ;
  win.ini, Fonts, "Helv 8,10,12,14,18,24 (CGA res)="
  win.ini, Fonts, "Helv 8,10,12,14,18,24 (EGA res)="
  win.ini, Fonts, "Helv 8,10,12,14,18,24 (60 dpi)="
  win.ini, Fonts, "Helv 8,10,12,14,18,24 (120 dpi)="
  win.ini, Fonts, "Helv 8,10,12,14,18,24 (VGA res)="
  win.ini, Fonts, "Helv 8,10,12,14,18,24 (8514/a res)="
  win.ini, Fonts, "Tms Rmn 8,10,12,14,18,24 (CGA res)="
  win.ini, Fonts, "Tms Rmn 8,10,12,14,18,24 (EGA res)="
  win.ini, Fonts, "Tms Rmn 8,10,12,14,18,24 (60 dpi)="
  win.ini, Fonts, "Tms Rmn 8,10,12,14,18,24 (120 dpi)="
  win.ini, Fonts, "Tms Rmn 8,10,12,14,18,24 (VGA res)="
  win.ini, Fonts, "Tms Rmn 8,10,12,14,18,24 (8514/a res)="
  ;
  ; Remove these font entries if they exist because these .ini entries
  ; are obsolete. We use "TrueType" rather than "Scalable"
  ;
  win.ini, Fonts, "Arial (Scalable)="
  win.ini, Fonts, "Arial Bold (Scalable)="
  win.ini, Fonts, "Arial Bold Italic (Scalable)="
  win.ini, Fonts, "Arial Italic (Scalable)="
  win.ini, Fonts, "Courier (Scalable)="
  win.ini, Fonts, "Courier Bold (Scalable)="
  win.ini, Fonts, "Courier Italic (Scalable)="
  win.ini, Fonts, "Courier Bold Italic (Scalable)="
  win.ini, Fonts, "Courier (TrueType)"
  win.ini, Fonts, "Courier Bold (TrueType)"
  win.ini, Fonts, "Courier Bold Italic (TrueType)"
  win.ini, Fonts, "Courier Italic (TrueType)"
  win.ini, Fonts, "Times New Roman (Scalable)="
  win.ini, Fonts, "Times New Roman Bold (Scalable)="
  win.ini, Fonts, "Times New Roman Bold Italic (Scalable)="
  win.ini, Fonts, "Times New Roman Italic (Scalable)="
  win.ini, Fonts, "Symbol PS (Scalable)="
  win.ini, Fonts, "Symbol (Scalable)="
  win.ini, Fonts, "Arial (TrueType)="
  win.ini, Fonts, "Arial Bold (TrueType)="
  win.ini, Fonts, "Arial Bold Italic (TrueType)="
  win.ini, Fonts, "Arial Italic (TrueType)="
  win.ini, Fonts, "Courier New (TrueType)="
  win.ini, Fonts, "Courier New Bold (TrueType)="
  win.ini, Fonts, "Courier New Bold Italic (TrueType)="
  win.ini, Fonts, "Courier New Italic (TrueType)="
  win.ini, Fonts, "Times New Roman (TrueType)="
  win.ini, Fonts, "Times New Roman Bold (TrueType)="
  win.ini, Fonts, "Times New Roman Bold Italic (TrueType)="
  win.ini, Fonts, "Times New Roman Italic (TrueType)="
  ;
  ; Remove these font entries if they exist because these .ini entries
  ; are obsolete. We use "Plotter" rather than "All res" Also, 8 point was
  ; added to the EGA res courier so we remove the old "Courier 10,12,15" font.
  ;
  win.ini, Fonts, "Roman (All res)="
  win.ini, Fonts, "Script (All res)="
  win.ini, Fonts, "Modern (All res)="
  win.ini, Fonts, "Courier 10,12,15 (EGA res)="
  ;
  ; The following lines will cause the MS-DOS half of setup to effectivly
  ; rename the [Fonts] section in win.ini. Setup does this by adding the
  ; [wt4gpi8s56bz] string to the [Fonts] section and then deleting the
  ; [Fonts] section string. Later, in the windows half of setup, it will
  ; rename [wt4gpi8s56bz] back to [Fonts]. Do not change these names!
  ;
  win.ini, Fonts,              , "[wt4gpi8s56bz]"
  win.ini, Fonts,   "[Fonts]"  ,

  ; The following line makes USER skip persistent net connections
  ; USER immediately deletes the entry so it is a onetime thing.
  win.ini, windows,, "SetupWin=1"

  ; The following lines fix problems with APPS
  win.ini, Compatibility,"NOTSHELL=", "NOTSHELL=0x0001"
  win.ini, Compatibility,"WPWINFIL=", "WPWINFIL=0x0006"
  win.ini, Compatibility,"CCMAIL=", "CCMAIL=0x0008"
  win.ini, Compatibility,"AMIPRO=", "AMIPRO=0x0010"
  win.ini, Compatibility,"REM=", "REM=0x8022"
  win.ini, Compatibility,"PIXIE=", "PIXIE=0x0040"
  win.ini, Compatibility,"CP=", "CP=0x0040"
  win.ini, Compatibility,"JW=", "JW=0x42080"
  win.ini, Compatibility,"TME=", "TME=0x0100"
  win.ini, Compatibility,"VB=", "VB=0x0200"
  win.ini, Compatibility,"WIN2WRS=", "WIN2WRS=0x1210"
  win.ini, Compatibility,"PACKRAT=", "PACKRAT=0x0800"
  win.ini, Compatibility,"VISION=", "VISION=0x0040"
  win.ini, Compatibility,"MCOURIER=", "MCOURIER=0x0800"
  win.ini, Compatibility,"_BNOTES=", "_BNOTES=0x24000"
  win.ini, Compatibility,"MILESV3=", "MILESV3=0x1000"
  win.ini, Compatibility,"PM4=", "PM4=0x2000"
  win.ini, Compatibility,"DESIGNER=", "DESIGNER=0x2000"
  win.ini, Compatibility,"PLANNER=", "PLANNER=0x2000"
  win.ini, Compatibility,"DRAW=", "DRAW=0x2000"
  win.ini, Compatibility,"WINSIM=", "WINSIM=0x2000"
  win.ini, Compatibility,"CHARISMA=", "CHARISMA=0x2000"
  win.ini, Compatibility,"PR2=", "PR2=0x2000"
  win.ini, Compatibility,"PLUS=", "PLUS=0x1000"
  win.ini, Compatibility,"ED=", "ED=0x00010000"
  win.ini, Compatibility,"PP=",
  win.ini, Compatibility,"APORIA=", "APORIA=0x0100"
  win.ini, Compatibility,"EXCEL=", "EXCEL=0x1000"
  win.ini, Compatibility,"GUIDE=", "GUIDE=0x1000"
  win.ini, Compatibility,"NETSET2=", "NETSET2=0x0100"
  win.ini, Compatibility,"W4GL=", "W4GL=0x4000"
  win.ini, Compatibility,"W4GLR=","W4GLR=0x4000"
  win.ini, Compatibility,"TURBOTAX=","TURBOTAX=0x00080000"
  win.ini   , Sounds,  "RingIn="                  ,   "RingIn=ringin.wav,Rozmowa - sygnał wychodzący"     ,noclobber
  win.ini   , Sounds,  "RingOut="                 ,   "RingOut=ringout.wav,Rozmowa - sygnał przychodzący"   ,noclobber
  win.ini   , Network, "DefaultDialogs="

  ; defaults to put up net warning messages
  win.ini, windows, "NetMessage=", "NetMessage=Yes"
  win.ini, windows, "NetWarn=",    "NetWarn=1"

  ; remove beta2 lines
  win.ini, PrinterPorts,          "Microsoft Mail Local Fax="
  win.ini, devices,               "Microsoft Mail Local Fax="

[system]
; The various SYSTEM.DRV, SOUND.DRV, COMM.DRV
;
; These   are the   drivers   which may vary from system to system,
; but are selected only   by the [machine] menu -- they do not have
; special menus   for their selection.
system   =    2:system.drv
sound    =    2:mmsound.drv
comm     =    2:comm.drv
hpsystem =    2:hpsystem.drv

[machine]
; This section defines default machine selections.  The   system
; description from each   entry will appear in the initial machine
; selection menu of Setup.
;
; An * means that setup will use the device specified here and override
; the detected device, this applies to keyboards, mice, and displays.
;
; Each entry contains a   descriptive line for the system-selection menu,
; followed by the filenames of the drivers in fixed order.
;
;      Field      1         2           3        4         5          6         7          8         9             10     11
; prof_str      = Desc Str, System drv, kbd drv, kbd type, mouse drv, disp drv, sound drv, comm drv, himem switch, ebios, cookies
;
ast_386_486     = "AST Premium 386/25 oraz 386/33 (CUPID)",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,ast_cookz
at_and_t        = "AT&T PC",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,
att_nsx_20      = "AT&T NSX 20 : Safari notebook",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios
everex_386_25   = "Everex Step 386/25 (lub zgodny)",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,everex_cookz
hewlett_packard = "Hewlett-Packard: wszystkie komputery",hpsystem,kbdhp,t4s0enha,nomouse,vga,sound,comm,,hpebios,
ibm_ps2_70p     = "IBM PS/2 Model P70",system,kbd,t4s0enha,nomouse,!vga,sound,comm,,ebios,
ibm_ps2_l40sx   = "IBM PS/2 Model L40sx",system,kbd,!t4s0enha,nomouse,vga,sound,comm,,ebios,ibml40_cookz
apm_sl          = "System Intel 386SL z APM",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,apm_sl_cookz
ibm_compatible  = "System MS-DOS",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,
apm             = "System MS-DOS z APM",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,apm_cookz
ncr_386sx       = "NCR: komputery 386/486",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,ncr386sx_cookz
nec_pm_sx+      = "NEC PowerMate SX Plus",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,nec_pm_cookz
nec_prospeed    = "NEC ProSpeed 386",system,kbd,t4s0enha,nomouse,!vga,sound,comm,,ebios,
toshiba_1600    = "Toshiba 1600",system,kbd,t4s0enha,nomouse,vga,sound,comm,"TOSHIBA",ebios,
toshiba_5200    = "Toshiba 5200",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,t5200_cookz
zenith_386      = "Zenith Data Systems: komputery 386/486",system,kbd,t4s0enha,nomouse,vga,sound,comm,,ebios,zen386_cookz

;
; Cookies as specified in machine section
;
; ini file, section, cookie, needed file
;
; specialdriver,,,file will add an installable driver to [boot]drivers=
;

[apm_cookz]
specialdriver,,,2:power.drv
system.ini,386enh,"device=vpowerd.386",2:vpowerd.386
,,,2:power.hlp

[apm_sl_cookz]
specialdriver,,,2:power.drv
system.ini,386enh,"device=vpowerd.386",2:vpowerd.386
,,,2:power.hlp
system.ini,power.drv,"OptionsDLL=sl.dll",2:sl.dll
,,,2:sl.hlp

[ast_cookz]
system.ini,386enh,"emmexclude=E000-EFFF",

[everex_cookz]
system.ini,386enh,"8042ReadCmd=A2,1,F",
system.ini,386enh,"8042ReadCmd=A3,1,F",
system.ini,386enh,"8042WriteCmd=B3,8,F",

[ibml40_cookz]
system.ini,386enh,"emmexclude=E000-EFFF",
system.ini,386enh,"DMAbuffersize=64"


[ncr386sx_cookz]
system.ini,386enh,"emmexclude=E000-EFFF",
system.ini,386enh,"emmexclude=C600-C7FF",

[nec_pm_cookz]
system.ini,386enh,"VirtualHDirq=NO",

[t5200_cookz]
system.ini,386enh,"emmexclude=C000-C7FF",

[zen386_cookz]
system.ini,386enh,"emmexclude=E000-EFFF",

[special_adapter]
eitherlink  = DMAbuffersize,32          ; Needed if EitherLink MC is detected.

[ebios]
ebios       = x:*ebios               ; Required for most 386 machines.
hpebios     = 2:hpebios.386,x:*ebios ; Required for HP 386 machines.

;
; Language DLL must be installed for non US installation.
;
; profile = language DLL, DLL description, language ID (ilanguage)
;
[language]
enu =               , "Angielski (amerykański)"             ,1033
eng = 2:eelangen.dll, "Angielski (międzynarodowy)" ,2057
cro = 2:langcro.dll, "Chorwacki", 11050
csy = 2:langcze.dll, "Czeski", 1029
deu = 2:eelanggr.dll, "Niemiecki"                              ,1031
plk = 2:langpol.dll, "Polski", 1045
rom = 2:langrom.dll, "Rumuński", 1048
srb = 2:langser.dll, "Serbski", 1050
sky = 2:langslo.dll, "Słowacki", 1051
slv = 2:langslv.dll, "Słoweński", 1061
hun = 2:langhun.dll, "Węgierski", 1038

[dosdisk]
number=7:country.sys

; files included on disk but not referenced in anywhere in setup.inf
[keepers]
    1:setup.exe     ; dossetup program
    1:setup.inf     ; setup information file
    1:xmsmmgr.exe   ; xms manager
    1:setup.shh     ; automatic setup template file
    6:prtupd.inf    ; Printer driver update file
    A:admincfg.exe  ; Network Admin Utility 
    A:pss.inf       ; PSS Support Protocol File

; List of 3rd party drivers that replace *wdctrl
; Setup will not add *wdctrl if one of these is present
[*wdctrl]
    cpqwdctl.386    ; compaq wd controller
    ultraisa.386    ; ultra store wd controller
    fdscsi.386      ; future domain scsi
    hc_win.386      ; quantum hardcard
    cam_win.386     ; quantum passport scsi
    scsi_win.386    ; quantum passport scsi

; List of 3rd party drivers that replace *int13
; Setup will not add *int13 if one of these is present
[*int13]
    cpqint13.386    ; used with compaq cpqwdctl.386
    qtmint13.386    ; used with quantum hc_win.386, cam_win.386, and scsi_win.386
    int13.386       ; used with future domain

; List of 3rd party drivers that replace *vpd
; Setup will not add *vpd if one of these is present
[*vpd]
    wpsljvpd.386